Hot Melt Adhesive for garment and shoes

Hot melt adhesive film Our hot melt adhesive films are widely used in computerized embroidery. And they are highly elastic and sticky, can be widely applied in a variety of ranges, such as embroidery patches, badges, etc. And they are non-toxic and do not contain the harmful element for human body. Following is the details of our hot melt adhesive film: Material: PO/PES/PA Size Available: Thickness: 0.08/0.10/0.12/0.15/0.18 mm Width: 48 cm Melting Temperature: 120-150 degree centigrade (depends on the thickness and material of the items you want to glue). Application: 1. Iron on the hot melt on the back of the embroidery patches (please note: DO NOT REMOVE THE SILICONE RELEASE PAPER ON THE BACK OF THE ADHESIVE FILM IN THIS STEP). 2. Tear off the silicone release paper, put the embroidery patch which is already attached adhesive film onto the garment, heat it again, then the patch will be tightly glued to the garment. Characteristics: 1. Highly elastic and sticky, can be widely applied in a variety of ranges. 2. Non-toxic and does not contain the harmful element for human body.